A Complete Envirotab 4g Application System
(As described in EPA Reg No 99407-1)
The Envirotab 4g Professional Starter Kit combines premeasured chlorine dioxide-generating tablets with two application tools and Synergy Soil Break cleaning additive. It provides cleaning professionals with the equipment and products needed to prepare and apply label-directed solutions on compatible surfaces.
Use the trigger sprayer for controlled liquid application or the pump foam sprayer when greater surface coverage and extended surface contact are desirable.
Everything Included
- Two pouches of Envirotab 4g Tablets
- 28 individually packaged tablets per pouch
- 56 tablets total
- One labeled secondary trigger-sprayer bottle
- One Synergy Americas pump foam sprayer
- One gallon of Synergy Soil Break
- Each tablet is individually sealed until needed
Two Principal Mixing Levels
Approximately 100 ppm
Dissolve one Envirotab 4g Tablet in one gallon of water for label-directed cleaning, deodorizing and bacteriostatic applications.
A bacteriostatic treatment inhibits the growth of stain- and odor-causing bacteria on treated hard surfaces. It should not be interpreted as a general sanitizing or disinfecting claim.
Approximately 400–460 ppm
Dissolve one Envirotab 4g Tablet in:
- One liter of water to prepare approximately 400 ppm, or
- 32 fluid ounces of water to prepare approximately 460 ppm.
The higher-strength solution may be used for applicable deep-cleaning, fungistatic and slimicidal treatments when specifically directed by the registered product label.
Fungistatic use helps control mold and mildew under the specified treatment conditions. Slimicidal use controls slime in designated water systems and on applicable surfaces. Neither claim should be expanded beyond the uses and directions appearing on the registered label.
Add Cleaning Power with Synergy Soil Break
Synergy Soil Break is a professional detergent additive formulated for use with freshly prepared aqueous chlorine dioxide solutions. It helps loosen stubborn soils and residues so they can be agitated, wiped or rinsed from compatible surfaces.
- Add the required amount of water to a clean container.
- Add the Envirotab 4g Tablet to the water.
- Allow approximately one to two minutes for the tablet to dissolve completely.
- Add Soil Break only at the use rate specified by its product directions.
- Transfer the prepared solution to the trigger sprayer or pump foam sprayer.
- Apply using the concentration, method, contact time and finishing procedure required for the intended application.
Use the prepared working solution within the period specified by the applicable product directions.
Spray or Foam Application
Trigger Sprayer
The included secondary bottle is suitable for controlled application to smaller areas, equipment, fixtures and other compatible surfaces.
Pump Foam Sprayer
The pump foamer produces clinging foam that helps keep the cleaning solution in contact with vertical and irregular surfaces. It is particularly useful when cleaning walls, showers, tile, grout, equipment and other areas where an ordinary liquid spray may run off too quickly.
Foam retention does not replace the contact time, agitation, rinsing or other finishing procedures required by the applicable product label.
Potential Professional Applications
Depending on the selected concentration and complete label directions, the system may be used for cleaning and deodorizing compatible surfaces in:
- Commercial and institutional facilities
- Restrooms, showers, tile and grout areas
- Restoration and professional cleaning projects
- Animal-care facilities and equipment
- Transportation and marine interiors
- Waste-handling areas and containers
- Floors, walls and cleaning equipment
- Greenhouses and agricultural facilities
- Water-storage and water-line systems where specifically directed
Always verify surface compatibility before treating painted, coated, sealed, polished or delicate materials.
Important Preparation and Safety Information
Always add the tablet to water—never pour water directly onto a tablet. Allow the tablet to dissolve completely before adding Soil Break or transferring the solution to an applicator.
Wear the personal protective equipment required by the labels when handling tablets, preparing solutions and applying the products. Protect the hands, eyes, face and clothing, and provide adequate ventilation.
Do not combine Envirotab or Soil Break with bleach, ammonia or other chemicals except where a combination is specifically permitted by the applicable product directions.
Keep tablets sealed in their original foil packaging until use. Store all kit components properly, keep them out of reach of children and use each product only in accordance with its complete labeling.
