A Complete Envirotab Cleaning System in One Kit

The Envirotab® 1-Gram Small Starter Kit combines premeasured chlorine dioxide tablets with the reusable tools needed to prepare, apply and wipe the solution properly.

Add one Envirotab 1g tablet to the included 32-ounce bottle of water to prepare approximately 100–115 ppm chlorine dioxide solution. Use the trigger sprayer and yellow microfiber cloths to clean, deodorize and sanitize compatible surfaces around the home, office or business.

With 60 individually protected tablets, the kit can make up to:

• Sixty 32-ounce bottles
• 120 microfiber cleaning cloth loads when the bottle is used to dampen rather than saturate the cloth
• 15 gallons of prepared 100–115 ppm solution

Instead of buying and discarding multiple bottles of ready-to-use cleaner, simply reuse the included bottle and prepare fresh solution as needed.

What Is Included?

60 Envirotab 1-Gram Tablets

Each tablet is sealed in an individual foil packet to protect it from moisture until needed.

One tablet dissolved in 32 fluid ounces of water produces approximately 100–115 ppm chlorine dioxide solution for routine surface cleaning, deodorizing and sanitizing.

One 32-Ounce Trigger-Sprayer Bottle

The dark green PET bottle helps protect the prepared solution from ambient light. Its weather-resistant Envirotab label includes:

• Mixing directions
• Application guidance
• Cleaning, deodorizing and sanitizing steps
• QR code for additional information
• Secondary-container identification

Two Yellow 12" × 12" Microfiber Cloths

The two-cloth system helps users separate the damp-cleaning and finishing steps:

1. Use the first cloth to spread the solution, loosen soil and capture contaminants.
2. Use the second clean cloth for the final dry wipe where appropriate.

Microfiber provides greater physical soil capture than paper towels and helps make more efficient use of the prepared solution.

Clean, Deodorize and Sanitize in Three Steps

1. Clean

Spray the prepared solution onto the surface or apply it to the first yellow microfiber cloth. Wipe thoroughly to remove visible soil and contamination.

2. Deodorize

Lightly mist compatible hard or soft surfaces affected by odors. Chlorine dioxide reacts with many odor-causing compounds instead of covering them with perfume.

Allow odor-treated surfaces to air-dry after confirming material compatibility.

3. Sanitize

Apply the solution thoroughly and keep the surface visibly wet for the contact time stated on the current product label. Remove loosened material or remaining moisture as appropriate for the surface and application.

How to Prepare the Solution

1. Fill the included trigger-sprayer bottle with 32 fluid ounces of warm water.
2. Open one foil packet immediately before use.
3. Add one complete Envirotab 1g tablet to the water.
4. Wait approximately 30–45 seconds, or until the tablet has dissolved.
5. Swirl or gently invert the bottle to distribute the solution.
6. Attach the trigger sprayer and use the solution as directed.
7. Protect the prepared solution from excessive heat and direct sunlight.

Do not vigorously shake a tightly sealed container while the tablet is activating.

Recommended Microfiber Cleaning Method

For Routine Cleaning

1. Spray the surface or dampen the first microfiber cloth.
2. Wipe the entire area using overlapping passes.
3. Refold the cloth frequently to expose a clean section.
4. Use the second cloth to dry the surface and collect remaining loosened material.

For Touchpoints and Higher-Concern Surfaces

1. Remove visible soil first.
2. Apply enough solution to wet the entire surface.
3. Maintain the label-directed wet contact time.
4. Complete the process with a clean cloth when appropriate.
5. Replace or launder contaminated microfiber before moving to another area.

Do not continue cleaning multiple areas with a visibly soiled cloth.

Why Choose the Small Starter Kit?

Everything Is Ready to Work Together

The bottle is sized for the standard one-tablet dilution, while the two microfiber cloths support a practical damp-wipe and dry-wipe cleaning method.

No Measuring Required

There are no liquid concentrates to pour and no complicated dilution ratios to calculate. Add one premeasured tablet to one full 32-ounce bottle.

Prepare Fresh Solution as Needed

Individual foil packets protect unused tablets until they are opened, allowing users to prepare solution only when it is required.

Fragrance-Free Odor Control

Envirotab addresses many odor-causing compounds through oxidation rather than covering them with added perfume.

Low-Residue Cleaning

The prepared solution does not contain the conventional detergent load responsible for sticky films that can attract additional soil.

Reduces Packaging and Storage

One compact pouch can replace as many as sixty quart-size containers of ready-to-use product.

Important Use Notes

• Remove heavy grease, soap buildup and visible organic soil before sanitizing.
• Follow the current label for application instructions and required wet contact time.
• Test sensitive materials in an inconspicuous area.
• Apply solution to a cloth instead of spraying directly onto electronics.
• Follow equipment manufacturers’ cleaning instructions.
• Rinse food-contact surfaces when required by the product label or applicable regulations.
• Keep children and animals away from wet treated surfaces.
• Allow treated areas to dry and ventilate before normal use.
• Do not mix tablets or prepared solution with bleach, acids, ammonia or other cleaning chemicals.
• Avoid breathing mist or concentrated vapors.
• Do not ingest tablets.
• Keep tablets dry and inside their original foil packets until use.

Storage and Care

Tablets

• Store in the original resealable pouch.
• Keep every unused tablet sealed in its foil packet.
• Protect from moisture, heat and direct sunlight.
• Do not handle tablets with wet hands.
• Keep out of reach of children.

Prepared Solution

• Store in the included labeled bottle.
• Keep away from heat and direct sunlight.
• Do not transfer the solution into an unlabeled container.
• Prepare only the amount reasonably needed.

Microfiber Cloths

• Wash used cloths separately from heavily linting fabrics.
• Avoid fabric softener and dryer sheets because they can coat the fibers.
• Use a mild detergent.
• Air-dry or tumble-dry using low heat.
• Do not return a damp cloth to the kit or tablet-storage area.

Frequently Asked Questions

How much solution does this kit make?

Each tablet makes 32 fluid ounces of 100–115 ppm solution. Sixty tablets make up to 60 quarts, or 15 gallons, of prepared solution.

Why are two microfiber cloths included?

One cloth is used for damp cleaning and soil collection. The second provides a clean finishing or dry wipe, helping prevent loosened material from being redistributed.

Can I reuse the bottle?

Yes. The bottle is intended to be refilled using one Envirotab 1g tablet and 32 fluid ounces of water. Inspect the bottle and trigger regularly and replace damaged components.

Does the solution contain fragrance?

No added fragrance is used to cover odors. Chlorine dioxide reacts with many odor-causing compounds through oxidation.

Does Envirotab replace every cleaning chemical?

No. Heavy grease, mineral scale and substantial soil may require an appropriate detergent, degreaser or descaler before applying Envirotab.

Can it be used on soft surfaces?

The prepared solution may be lightly misted on compatible, water-safe soft surfaces for odor treatment. Always test colorfastness first and avoid over-wetting.

Can it be sprayed on electronic equipment?

Do not spray directly into electronics. Apply the solution to a microfiber cloth and follow the equipment manufacturer’s instructions.

Is this kit intended for drinking-water treatment?

While chlorine dioxide has been used for over 100 years for the treatment of water, this starter kit is configured and marketed for surface cleaning, deodorizing and sanitizing. Use only applications and concentrations expressly supported by the current product labeling.